Active

Contract Opportunity

Procurement Technical Assistance Centers (PTACs) are an official government contracting resource for small businesses. Find your local PTAC (opens in new window) for free government expertise related to contract opportunities.

Essential/significant physical, functional, or performance characteristics.

Salient Characteristics are those Characteristics that make an item equal to the brand name item we specify. Specifically, salient characteristics are those characteristics of the brand name item that the VA needs.

Salient Characteristics:

The logistics warehouse at James H. Quillen VAMC currently uses Toyota 24v/175-amp hour electric pallet trucks with 110v input charging capability. Due to power grid infrastructure restrictions in the warehouse building, the facility is only able to utilize the specific 24v/175-amp hour equipment with 110v charging input. The Toyota models meet that restriction along with other characteristics listed below such as doorway and ceiling height restrictions.

• Heavy Gauge Unitized Steel Frame Construction


• Heavy Duty Mast with Interlocking I-Beam operating on Canted Ball Bearing Rollers


• High Durometer Crowned Polyurethane Drive Tire & Tandem Load Wheels


• Power-On Self-Test with Self Diagnostics.


• Fully Hinged Steel Service Access Door


• Oil-Immersed Power Train


• Heavy Duty Helical Spur Gear Type Transmission


• No Drive Contactors


• Lubrication Package for Pivot Points


• Pressure Overload Relief Valve & Lowering Control Fuses


• Thermal Protection & Current Limiting Circuitry


• Dual Hydraulic Reach Cylinders


• Mast 3-Stage (FSV) mast with full free lift. Mast specifications:


• Lift Height -150"


• Overall Lowered Height - 71.0"


• Free Lift - 23.0" with standard Load Backrest


• Lifting Capacity - 3,000 lbs. @ 24" load center


• Actual Capacity, based on quoted specifications, - 2,950 lbs. @24" load center to 150" MFH


• Carriage ITA Hook Type, 30" Carriage


• Forks "Forks 42" x 4" x 1.75" - Class II"


• Dimensions
  
  
  
  • 33" Inner Dimension
  
  
  • 41" Outer Dimension
  
  
  
  

• Load Backrest 48" High Load Backrest


• Speeds Travel Speed: 3.20 mph Lift Speed: 46 fpm


• Voltage 24 Volt Electrical System, with 110v input @ 175amp hour charging system


• Manual Steering Multifunction Control Handle


• Battery Compartment 32.3" (L) x 13.3" (W) x Open (H)


• Battery Discharge Indicator (Meter Type)


• "UL Approved Model Type "E"


• 24-volt battery and built-in 110v charger

• Emergency Power Disconnect Switch

• Thermal Protection & Current Limiting Circuitry

• Automatic Resetting Circuit Breaker

• Reverse Polarity Protection

1. Essential/significant physical, functional, or performance characteristics.

Salient Characteristics are those Characteristics that make an item equal to the brand name item we specify. Specifically, salient characteristics are those characteristics of the brand name item that the VA needs.

Salient Characteristics:

The logistics warehouse at James H. Quillen VAMC currently uses Toyota 24v/175-amp Hour electric pallet trucks with 110v input charging capability. Due to power grid infrastructure restrictions in the warehouse building, the facility is only able to utilize the specific 24v/175-amp hour equipment with 110v charging input. The Toyota models meet that restriction along with other characteristics listed below such as doorway and ceiling height restrictions.

• 24-Volt electrical system

• Battery/charger pack (24V) flooded lead-acid (175 Ah)

• AC drive motor with thermal protection & current limiting

• Class “F” motor insulation

• Transistor drive control system

• Controller area network (CAN-bus) communication

• Regenerative braking

• Contactor-less drive controls

• Electronic touchpad, keyless entry system with password protection

• Programmable performance for up to 10 operators

• Electronic raise & lower controls in operator handle

• Programmable auto-off system

• Error indicator with self-diagnostics

• Fault code memory with hour meter reading

• Hour meter indicator

• Programmable service indicator

• Battery discharge indicator with lift interrupt

• Anti-rollback system

• Fused control & power circuits

• Box rail fork construction

• Tapered fork tips with pallet entry slides

• Polyethylene stability wear pads (reversible)

• Teflon® -coated PolyLube™ bushings

• Chrome-plated lift cylinder, 2" dia.

• Rubber drive tire, 10" dia. x 5" width

• Polyurethane load wheels, 3.25" dia. x 4.5" width

• Battery compartment 26.5" x 7.8" x open height

• SB-175 battery connector (red)

• High-strength service cover with pen/pencil storage tray

• Tool-free cover removal

• Steel fixed pull rods

• Electric horn

• Stainless steel lift linkage pins

• Multifunction control handle with ergonomically angled handgrips

• Fingertip control of all functions

• Directional thumb controls

• Programmable neutral speed reduction Direction reverse switch on control handle

• Turtle torque control

• Spring-loaded control handle

• “Pinwheel” capability for right angle stacking

• Electric disc brake

• Emergency power disconnects

• Battery disconnect handle

• Electronic brake release jumper

Attachments/Links